Alyseo 106
SELTA S.p.A
.
All rights reserved. No parts of this document can be reproduced, memorized into archive system or transmitted
in any shape or through any means without the previous authorization of SELTA S.p.A.
Configuration Interface
4-23
Alyseo 106 User Manual
720041008-A0-GB Issue 4
All the functions of this menu have at least one or two possibilities:
on ---> Abilita (Enable)
off ---> Disabilita (Disable).
List of functions:
Alyseo106 configure > cntrl
Alyseo106 access control > (‘?’)
none
disable alyseo port access
snmp
snmp access
http
http access
telnet
telnet access
ftp
ftp access
endpoint
Frame Relay channel control Usage: endpoint <DLCI>
pvc
ATM channel control Usage <VPI> <VCI>
route
manipulate the IP routing table
delete
Delete a channel control
show
show access control
done
done control configuration
In details:
none
This command allows disabling all the data ports of alyseo, as the following example shows:
Alyseo106 access control > none
Alyseo port access OFF <--- result of the command
snmp
It allows enabling or disabling the snmp packets.
Alyseo106 access control > snmp
on enable snmp access
off disable snmp access
Alyseo106 access control > snmp on
SNMP ON <--- result of the command
Alyseo106 access control > snmp off
SNMP OFF <--- result of the command
http
It allows enabling or disabling the access via IP address, the syntax is similar to that of snmp
command.
Summary of Contents for Alyseo 106
Page 1: ...User Manual Alyseo 106 ...
