Sekonic SR-2300, Manual

Page: 43 / 70

-43-
B
Display back surface reading sensor data
This displays the settings for “sensor pitch” and “sensor type” for the back surface reading unit in
this device. (This display is available only when the device has a back surface reading unit
attached.)
1.
Press the
MENU
switch to enter the menu mode.
2.
Use the
UP
and
DOWN
switches to select the following parameters,
and press the
FEED/ENTER
switch.
3.
Use the
UP
and
DOWN
switches to select [Type of Back Reading Sensor] display,
and press the
FEED/ENTER
switch.
4.
Use the
UP
and
DOWN
switches to display the settings.
Sensor pitch
Sensor type
5.
Keep pressing the
C
CLEAR/EXIT
switch until it returns to normal mode,
or press the
MENU
switch to return to normal mode.
Sensor pitch display data
• 0.2 inch
• 0.2 inch S
• 0.25 inch • 0.3 inch
• 0.3inch F • 1/6 inch
• Violate
Sensor type display data
• Infra Red
• Visible Red
• Violate
Displaying various information
B
Displaying back surface reading sensor data