Sekonic SR-2300, Manual, Page: 24 / 70

-24-
Connecting to a computer
B
RS-232C
(3) Use the
UP
and
DOWN
switches to select [Character Bit Length] setting,
and press the
FEED/ENTER
switch.
(“ ” mark flashes in the first column of the first line on the LCD.)
(4) Use the
UP
and
DOWN
switches to set the value.
(5) Press the
FEED/ENTER
switch to save the setting value into memory.
(The flashing “ ” mark disappears from the LCD.)
(6) Keep pressing the
C
CLEAR/EXIT
switch until it returns to normal mode,
or press the
MENU
switch to return to normal mode.
Character bit length
value
• 7
• 8
2-3.
Setting parity
(1) Press the
MENU
switch to enter the menu mode.
(2) Use the
UP
and
DOWN
switches to select the following parameters,
and press the
FEED/ENTER
switch.
(3) Use the
UP
and
DOWN
switches to select [Parity] setting,
and press the
FEED/ENTER
switch.
(“ ” mark flashes in the first column of the first line on the LCD.)
(4) Use the
UP
and
DOWN
switches to set the value.
(5) Press the
FEED/ENTER
switch to save the setting value into memory.
(The flashing “ ” mark disappears from the LCD.)
(6) Keep pressing the
C
CLEAR/EXIT
switch until it returns to normal mode,
or press the
MENU
switch to return to normal mode.
Parity setting values
• None
• Odd • Even