Sekonic SR-2300, Manual

Page: 33 / 70

-33-
Data reading settings
B
Setting hopper mode
B
Setting hopper mode
Setting the hopper mode for reading sheets.
The hopper mode can be set to either “ADF” or “manual feed.”
If you set it to “manual feed,” you need to set the sheet insertion waiting time.
1.
Press the
MENU
switch to enter the menu mode.
2.
Use the
UP
and
DOWN
switches to select the following parameters,
and press the
FEED/ENTER
switch.
3.
Use the
UP
and
DOWN
switches to select [Hopper Mode] setting,
and press the
FEED/ENTER
switch.
(“ ” mark flashes in the first column of the first line on the LCD.)
4.
Use the
UP
and
DOWN
switches to set the value.
5.
Press the
FEED/ENTER
switch to save the setting value into memory.
(The flashing “ ” mark disappears from the LCD.)
6.
Keep pressing the
C
CLEAR/EXIT
switch until it returns to normal mode,
or press the
MENU
switch to return to normal mode.
Set sheet insertion waiting time when “manual feed” is selected
1.
Press the
MENU
switch to enter the menu mode.
2.
Use the
UP
and
DOWN
switches to select the following parameters,
and press the
FEED/ENTER
switch.
hopper mode
setting values
• ADF
• Manual Feed