Sekonic SR-2300, Manual

Page: 26 / 70

-26-
Connecting to a computer
B
RS-232C
(4) Use the
UP
and
DOWN
switches to set the value.
2-6.
Setting character code
(1) Press the
MENU
switch to enter the menu mode.
(2) Use the
UP
and
DOWN
switches to select the following parameters,
and press the
FEED/ENTER
switch.
(5) Press the
FEED/ENTER
switch to save the setting value into memory.
(The flashing “ ” mark disappears from the LCD.)
(6) Keep pressing the
C
CLEAR/EXIT
switch until it returns to normal mode,
or press the
MENU
switch to return to normal mode.
Flow control
setting values
• RS/CS • Xon/Xoff
(3) Use the
UP
and
DOWN
switches to select [Character Code] setting,
and press the
FEED/ENTER
switch.
(“ ” mark flashes in the first column of the first line on the LCD.)
(4) Use the
UP
and
DOWN
switches to set the value.
(5) Press the
FEED/ENTER
switch to save the setting value into memory.
(The flashing “ ” mark disappears from the LCD.)
(6) Keep pressing the
C
CLEAR/EXIT
switch until it returns to normal mode,
or press the
MENU
switch to return to normal mode.
Character code
setting values
• Accept All
• Ignore 4 Codes
If ignore some is
selected, the following
codes are ignored.
• 20H • 0AH
• 7FH • 1AH