Sekonic SR-2300, Manual

Page: 27 / 70

-27-
Data reading settings
This section explains how to change various sheet-reading settings.
All settings can also be made using computer commands.
B
Setting column
Set the column. The number of columns is different depending on the reading sensor.
1.
Press the
MENU
switch to enter the menu mode.
2.
Use the
UP
and
DOWN
switches to select the following parameters,
and press the
FEED/ENTER
switch.
Sensor pitch Setting range Default value
1/6 inch 1-48 columns 48 columns
0.2 inch 1-40 columns 40 columns
0.2 inch S 1-40 columns 40 columns
0.25 inch 1-33 columns 33 columns
0.3 inch 1-27 columns 27 columns
0.3 inch F 1-24 columns 24 columns
3.
Use the
UP
and
DOWN
switches to select [Setting of Column] setting,
and press the
FEED/ENTER
switch.
(“ ” mark flashes in the first column of the first line on the LCD.)
4.
Use the
UP
and
DOWN
switches to set the value.
5.
Press the
FEED/ENTER
switch to save the setting value into memory.
(The flashing “ ” mark disappears from the LCD.)
6.
Keep pressing the
C
CLEAR/EXIT
switch until it returns to normal mode,
or press the
MENU
switch to return to normal mode.
Columnsetting values
1 - maximum columns
Data reading settings
B
Setting column