Sekonic SR-2300, Manual

Page: 30 / 70

-30-
Data reading settings
B
Setting min. density level
B
Setting min. density level
You can set the min. density level for this device when it is in SR-600 operating mode. Sensitivity
levels range from 1 to 16, with level 1 being the maximum sensitivity and level 16 the lowest
sensitivity.
1.
Press the
MENU
switch to enter the menu mode.
2.
Use the
UP
and
DOWN
switches to select the following parameters,
and press the
FEED/ENTER
switch.
3.
Use the
UP
and
DOWN
switches to select [Min. Density Level] setting,
and press the
FEED/ENTER
switch.
(“ ” mark flashes in the first column of the first line on the LCD.)
4.
Use the
UP
and
DOWN
switches to set the value.
5.
Press the
FEED/ENTER
switch to save the setting value into memory.
(The flashing “ ” mark disappears from the LCD.)
6.
Keep pressing the
C
CLEAR/EXIT
switch until it returns to normal mode,
or press the
MENU
switch to return to normal mode.
Min. density level
setting values
1 - 16