-18-
Marking instructions
Marks readable by this device are as follows.
1)
Mark size: 0.5 x 3mm (standard mark)
2)
Readable writing instruments: pencils (black, HB or darker), ballpoint pens
(black or blue)
3)
Readable marks: Filled in, O, X,
4)
Readable darkness: PCS 0.6 or darker
Readable mark darkness can be adjusted.
You can check mark darkness using a diagnostic utility included in the
package, so check the darkness of the marks you want to read and adjust
the reading setting.
S e e
“Reading Settings
B
Setting Reading Sensitivity Level”
in this manual on P.30
“Reading Settings
B
Setting Contrast” in this manual on P.31
Note)
When using a mechanical pencil, make sure to mark with adequate
darkness.
Marking instructions
Summary of Contents for SR-2300
Page 70: ......
