Sekonic SR-2300, Manual

Page: 21 / 70

-21-
Connecting to a computer
B
USB
2.
Interface settings
(1) Press the
MENU
switch to enter the menu mode.
(2) Use the
UP
and
DOWN
switches to select the following parameters,
and press the
FEED/ENTER
switch.
(3) Use the
UP
and
DOWN
switches to select the following parameters,
Device ID
setting value
0-126
and press the
FEED/ENTER
switch to begin [Device ID] setting.
(“ ” mark flashes in the first column of the first line on the LCD.)
Set any number using the
UP
and
DOWN
switches.
(4) Press the
FEED/ENTER
switch to save the setting value into memory.
(The flashing “ ” mark disappears from the LCD.)
(5) Keep pressing the
C
CLEAR/EXIT
switch until it returns to normal mode,
or press the
MENU
switch to return to normal mode.