Segway RMP 210 V3, User Manual

Page: 41 / 50

41
User Manual
Batteries
Batteries
A single propulsion battery mounts to the bottom of the powerbase. An auxiliary battery mounts to the enclosure.
Characteristic Value
Charging Time
Before First Use 12 hours
Recharge From Empty ~2 hours
Temperature Ranges
Operating 32° F – 122° F (0° C – 50° C)
Charging 50° F – 122° F (10° C – 50° C)
Storage and Transport -4° F – 122° F (-20° C – 50° C)
General
Capacity (Ah) and Voltage 5.2 Ah, 73.6 volts
Dimensions 14 in x 7.5 in x 3.2 in (35.7 cm x 19 cm x 8.2 cm)
Weight 11.4 lbs (5.1 kg)
Table 25: Lithium-ion Battery Specifications
Auxiliary Battery
Battery 1
Rear
Figure 29: Battery Locations, 210
Battery Care
In order to keep your Segway batteries performing at their best, fully charge the batteries for at least 12 hours before the first use.
Charge the batteries after each use or once every eight hours of operation — whichever comes first. Charge your batteries only when
they are within the specified charging temperature range (see Table 25). When not in use, you may leave the RMP charging; the RMP
contains smart charging logic that will maintain the battery over time.
When storing the RMP, charge the batteries once a month. When storing spare batteries, or storing batteries not attached to the RMP,
charge them once every six months.
CAUTION!
Failure to charge the batteries could result in damage to the batteries. Left unplugged, the batteries could fully discharge over time,
causing permanent damage.