Segway i2 SE, Service Manual

Page: 15 / 92

1–1 Segway Personal Transporter SE Service Manual
1 LeanSteer
This chapter describes installation and removal procedures for the LeanSteer
Frame, LeanSteer Stem, and handlebar. The LeanSteer assembly pivots at the
base to control left/right movement of the PT.
WARNING!
• Failure to follow these safety precautions could lead to electrical shock,
serious injury, death, or damage to property.
• Read all instructions.
• Power off the Segway PT.
• Unplug the Segway PT.
• The LeanSteer Frame and LeanSteer Stem must be properly attached
and secured. Failure to properly attach the LeanSteer components
and/or maintain proper torque on the fasteners could result in
machine malfunction and could cause personal injury or damage to
the Segway PT. Using the Segway PT without properly assembling
the LeanSteer components and/or maintaining proper torque on the
fasteners could lead to an unexpected change in steering and could
result in serious injury and/or damage to the Segway PT from loss of
control, collisions, and falls.
• Check the tightness of the fasteners connecting the LeanSteer Stem
to the Pivot Base every time the LeanSteer Stem is removed and
reinstalled.
When to Replace
You need to replace the LeanSteer frame if any part is bent or otherwise broken.
Applies to Models
i2 SE, x2 SE, x2 SE Turf
Qualifications
Customer Replaceable
Customer Replaceable Kits
Handlebar Clamp Kit (20954-00001)
1 Handlebar Clamp
3 Fasteners
Handlebar Kit (20955-00001)
1 Handlebar