Sega Dinosaur King, Owner'S Manual

Page: 15 / 121

− 0 − − −
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
− 0 − − −
Make sure that all the adjusters are resting on the floor. The cabinet may move
and cause an accident if the adjusters are not laid out properly.
The adjusters are made of metal and therefore present a risk of damaging the
floor. Be sure to keep this in mind when positioning the cabinet.
1
SECURING IN PLACE (ADJUSTER ADJUSTMENT)
The cabinet is equipped with 4 casters and 2 adjusters.
After deciding on a location, bring the adjusters into direct contact with the ground and adjust the
cabinet so that it is completely level.
① Move the cabinet to the desired location.
Make sure there is space in the back for
air to fl ow.
② Bring the adjusters into direct contact
with the fl oor. U se a wrench to align the
height of the adjusters until the cabinet
is perfectly level. I f the fl oor is level, the
machine should be level with the casters
about 5 millimeters from the fl oor. (F I G.
6.1c)
③ After making the fi nal adjustments, fix
the adjuster height by tightening up the
adjuster nuts.
WARNING
！
STOP
IMPORTANT
ADJUSTABLE CASTER (2)
FIXED CASTER (2)
ADJUSTER (2)
ADJUSTER
ADJUSTER
Approx. 5 mm
CASTER
Fasten the nuts in an
upward direction.
FIG. 6.1 a Bottom View
FIG. 6.1b
FIG. 6.1c Aligning the Adjusters
FIG. 6.1d