Sega Dinosaur King, Owner'S Manual

Page: 39 / 121

− − − −
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
− − − −
● When working with the product, be sure to turn the power off. Working with the
power on may cause an electric shock or short circuit.
● Be careful not to damage wiring. Damaging wiring may cause electric shock or
short circuit.
● To prevent overheating, explosion, or fire:
・ Do not recharge, disassemble, heat, incinerate, or short the battery.
・ Do not allow the battery to come into direct contact with metallic objects or
other batteries.
・ To preserve or to dispose of the battery, wrap it in tape or other insulating
material.
● Follow local regulations when disposing of the battery. Improper disposal can
damage the environment.
If this error appears within one year then it is a problem with the board itself. The
board must be replaced.
To avoid risk of malfunction and damage:
・ Make sure the positive and negative ends are aligned correctly.
・ Use only batteries approved for use with this unit.
WARNING
！
CAUTION
！
STOP
IMPORTANT
10−5 REMOVING THE LITHUM BATTERY
This operation must only be performed when the battery is dead or under other
special circumstances and never at any other time.
① Carefully remove the battery in the battery holder (BAT1) on the SystemS P board.
② P lace the new battery (CR2032) into the holder with the + terminal facing upwards.
SystemS P Battery
・ SEGA P ART No.:
401-0054 or 401-0065
・ SEGA P ART NAME:
BATTERY CR2032/1F MATS U SH I TA
or
BATTERY CR2032 H I TACH I MAXE LL
BATTERY CR2032
FIG. 10.5