− 0 −
− −
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
− 0 −
− −
If a problem occurs, first check to make sure that the wiring connectors are
properly connected.
● In order to prevent electric shock and short circuit, be sure to turn power off
before working on the machine.
● Be careful not to damage wiring. Damaged wiring may cause electric shock or
short circuit.
● After fixing the problems regarding the Circuit Protector, reinstate the Circuit
Protector. Depending on the cause of the problem, using the Circuit Protector
without addressing the malfunction can generate heat and can present a fire
hazard.
● In the event that a problem cannot be resolved by employing the procedures
listed in this manual, be sure to request service from the office shown on
this manual or the dealer from whom the product was originally purchased.
Attempts to employ procedures other than those specified in this manual can
cause electrical shock, shorting, or fire.
18. TROUBLESHOOTING
WARNING
！
STOP
IMPORTANT
PROBLEMS
CAUSE
COUNTERMEASURES
Turning on the power switch fails to
power on the machine.
The power is not ON.
Firmly insert the power plug into the
outlet.
Either the main switch or the power
switch is turned off.
Turn on both the main switch and the
power switch.
Incorrect power source/voltage.
Make sure that the power supply/
voltage is correct.
The Circuit Protector malfunctions
due to a power surge.
After eliminating the cause of the
power surge, restore the Circuit
Protector of the AC Unit. (See next
page.)
Sound is not emitted.
Sound volume adjustment is not
correct.
・
Adjust the sound volume in the
Test Mode.
・
Adjust the sound volume with
“VR1” on SystemSP board. (See
Section 10.)
Sound-related circuit malfunction.
Perform SOUND TEST.
Cards are not dispensed.
Cards are empty.
Refill cards.
Card jam.
Remove the jammed card(s).
The connector is not connected
properly.
Ensure proper connection.
Card dispenser malfunction.
Exchange the card dispenser.
TABLE 18a TROUBLESHOOTING TABLE
Summary of Contents for Dinosaur King
