Sega Dinosaur King, Owner'S Manual

Page: 86 / 121

− 0 − − − − 0 − − −
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
PROBLEMS CAUSE COUNTERMEASURES
Cannot scan (read) cards. Card reader card slot is dirty. Use the attached cleaning card to
clean the card slot.
The connector is not connected
properly.
Ensure proper connection.
Card reader malfunction. Exchange the card reader.
Cannot enter TEST MODE. Switch malfunction. Exchange the switch.
Game Board abnormality. Exchange the Game Board.
The operation used to change to
TEST MODE is incorrect.
Ensure correct operation.
Monitor display is abnormal. Game Board and monitor connection
failure.
Ensure proper connection (of
connector).
Monitor malfunction. Exchange the monitor.
Game Board malfunction. Exchange the Game Board.
There is no response from control
panel buttons.
Button failure. Exchange the button(s).
The connector is not connected
properly.
Ensure proper connection.
Not set to game mode. Change setting to game mode.
TABLE 18b TROUBLESHOOTING TABLE
The Circuit Protector uses a bimetal to break
the circuit. Due to the heat, the machine cannot
be restarted until it cools. Wait at least 1 minute
before restarting. (Press the button in.)
CIRCUIT PROTECTOR
CIRCUIT PROTECTOR
FIG.18