− −
− −
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
● Before performing work, be sure to turn power off. Performing the work without
turning the power off can cause electric shocks or short circuits. In the case
that work should be performed with the power ON, this will be clearly stated in
the manual.
● To avoid electric shocks and short circuits, do not plug in or unplug the
machine too quickly.
● To avoid electric shocks, do not plug in or unplug the machine with wet hands.
● Do not leave power cords and earth wires exposed on the surface (floor,
passage, etc.). If exposed, the power cords and earth wires are susceptible to
damage. Damaged cords and wires can cause electric shocks or short circuits.
● To avoid causing a fire or electric shock, do not put things on or damage power
cords.
● During or after installation of the product, do not unnecessarily pull the power
cord. If damaged, the power cord can cause a fire or electric shock.
● In case the power cord is damaged, ask for replacement from the point-of-
purchase or the office herein stated. Using a damaged cord can cause fire,
electric shock or leakage.
● Be sure to perform grounding appropriately. Inappropriate grounding can cause
electric shocks.
● Be sure to use fuses meeting the specified rating. Using fuses exceeding the
specified rating can cause a fire or electric shock.
● Ensure that connectors for IC BD and others are properly inserted. Insufficient
insertion can cause an electric shock.
● Specification changes, removal of equipment, conversion and/or additions not
designated by SEGA are not permitted.
・ Failure to observe this may cause a fire or an electric shock. Non-compliance
with this instruction can have a bad influence upon the physical condition of the
players or the onlookers, or result in injury during play.
・ SEGA shall not be held responsible for damage, or compensation for damage
to a third party, caused by specification changes not designated by SEGA.
● Be sure to perform the periodic maintenance inspections herein stated.
● For the IC board circuit inspections, only the logic tester is allowed. The use of
a multiple-purpose tester is not permitted, so be careful in this regard.
● When cleaning the CRT surfaces, use a soft and dry cloth. Do not apply
chemicals such as thinner, benzine, etc.
● Static electricity from your body may damage some electronics devices on the
IC board. Before handling the IC board, touch a grounded metallic surface so
that the static electricity can be discharged.
● Do not turn the power on and off continuously. Repeatedly turning the power on
and off may cause product malfunction or parts damage.
● Some parts are not specifically designed and manufactured for this game
machine. The manufacturers may discontinue, or change the specifications of,
such general-purpose parts. If this is the case, SEGA cannot repair or replace
the damaged game machine, whether or not the warranty period has expired.
1. HANDLING PRECAUTIONS
When installing or inspecting the machine, be very careful of the following points and pay
attention to ensure that the player can enjoy the game safely.
Non-compliance with the following points or inappropriate handling running counter to the
cautionary matters herein stated can cause personal injury or damage to the machine.
STOP
IMPORTANT
WARNING
！
Summary of Contents for Dinosaur King
