Sega Dinosaur King, Owner'S Manual

Page: 63 / 121

− − − −
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
− − − −
(2) INPUT TEST
Select INPUT TEST to display the following
screen and check the status of input devices.
This test should be run periodically to ensure
that each input device is functioning correctly.
The input buttons are functioning correctly if
each respective display changes from “OFF” to
“ON” when pressing the input buttons.
Press the SERVICE and TEST Buttons
simultaneously to return to the Game Test Mode
screen.
(3) VOLUME ADJUSTMENT
Select VOLUME ADJUSTMENT to display the
following screen and adjust the sound volume.
Move the cursor to VOLUME and press the
buttons on the 1P side to increase the volume,
and the buttons on the 2P side to decrease the
volume setting.
Volume can be set at a level between 0 and 15.
Move the cursor to EXIT and press the TEST
Button to return to the Game Test Mode screen.
(4) C.R.T. TEST
INPUT TEST Screen
VOLUME ADJUSTMENT Screen
Select CRT TEST to display the following screen and check the status of the CRT (monitor).
This test should be run periodically to check the monitor condition.
Pressing the TEST Button will display the “Color Bar,” “All Black,” and “All White” screens in
order. Press the TEST Button again to return to the Game Test Menu screen.
Refer to Section 16, “MONITOR,” for more information on CRT adjustment.
CRT TEST Screen <3/3> CRT TEST Screen <1/3> CRT TEST Screen <2/3>