Sega Dinosaur King, Owner'S Manual

Page: 44 / 121

− − − − − − − −
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
I TEMS DESCR IP T IO N REFERENCE SECT IO NS
I NSTA LL AT IO N O F
MACH I NE
When the machine is installed, perform the
following:
1. Check to ensure each setting is the standard
setting at shipment.
2. Check each I nput equipment in the I N PU T
TEST or the CARD READER TEST mode.
3. Check each O utput equipment in the
OU T PU T TEST or the CARD D I S P ENSER
TEST mode.
4. Test on- I C-Board I C's in the self-test mode.
11-2, 11-3 A
11-4 (2), (6)
11-4 (3), (7)
11-2 C, L
MEM O RY TEST This test is automatically e x ecuted by selecting
RAM TEST or R O M TEST in the Menu mode.
11-2 C, L
P ER IO D I C SERV I C I NG P eriodically perform the following:
1. Run Memory Test.
2. Ascertain each setting.
3. Test each I nput equipment in the I N PU T
TEST or the CARD READER TEST mode.
4. Test each O utput equipment in the OU T PU T
TEST or the CARD D I S P ENSER TEST
mode.
11-2 C, L
11-2, 11-3 A
11-4 (2), (6)
11-4 (3), (7)
C O NTR OL SYSTEM 1. Check each I nput/ O utput equipment in the
Game Test mode.
2. Adjust or replace each I nput/ O utput
equipment.
3. I f the problem still persists, check each
equipment's mechanism movements.
11-4
11-4
Sections 12, 13, 14, 16
M O N I T O R (CRT) I n the Monitor Adjustment mode, check to see
if monitor adjustments are appropriate.
Section 17
I C B O ARD Memory Test. 11-2 C, L
11. EXPLANATION OF TEST AND DATA DISPLAY
TABLE 11 EXPLANATION OF TEST MODE
By operating the TEST and SERVICE Buttons on the maintenance switch unit, periodically
perform tests and data check. When installing the machine for the first time, collecting cash, or
when the machine does not function correctly, perform a machine check in accordance with the
explanations given in this section.
The chart below shows which test or screen should be used to handle each situation or problem.
This product uses the SystemSP board. This system can become play different games simply by
overwriting the ROM onboard the SystemSP board or by inserting compact flash.
Therefore this system has two Test Modes. The System Test Mode has numerous common
functions for the SystemSP board such as automatic self-diagnostic test and coin settings, whilst
the Game Test Mode has an input test for the specific controls for this product.