SEQUENCER WITH
DIFFERENTIAL PRESSURE
SWITCH
Technical brochure
FI 72.0483.0720E
Page 23 sur 43
- 23 -Page 23 sur 43
- 23 - - 23 -
- 23 -
- 23 -
Rejection CDM page:
This page is accessible from the main page by pressing the "CDM rejection
value” display area.
1: Graph of the CDM rejection.
Display of the last 430 operating points of the device (1 new point is added according to the value of the set
step). When the power is turned off, the graphic is reset.
2: Setting the graph advance (1 to 255 seconds).
Each time this timer expires, a new point is added to the graph. The value of the added point is the average
measured over this time (see note 1).
3: Display of the instantaneous rejection from the CDM
in form of an orange bargraph from 0 to 100% and in digital display.
Note: 100% corresponding to n2 x PR (see CDM manual)
4: Display of the average x minutes rejection from the CDM
in form of a red bargraph from 0 to 100% and in digital display.
Note: 100% corresponding to n2 x PR (see CDM manual)
5: If press on this area: return to the main page.
6: Display of current protection level.
1
4
2
5
3
6
