SEQUENCER WITH
DIFFERENTIAL PRESSURE
SWITCH
Technical brochure
FI 72.0483.0720E
Page 14 sur 43
- 14 -Page 14 sur 43
- 14 - - 14 -
- 14 -
- 14 -
CONNECTIONS:
Connections must be done when power off
Connections terminals
are reachable after dismounting the front panel of the box.
According to configuration of the device, some terminals may not be included.
Cable strings will be flexible and will have a section between 0.5 and 1.5 mm
2
.
Power supply of the device:
The power supply for the device is connected in the upper part to the left of the board :
Communication extension, CDM, customer:
These connections are located in the lower part, to the left of the board:
Supply
According version
115V/230V
24V/48V
50/60Hz
Toward SV
extension boxes
Toward dust
rejection
controler CDM
Customer
communication
RS485
Modbus RTU
3 micro-switches to turn
ON
(extension com)
3 micro-switches to turn
ON
(CDM com)
Fuse protection power
supply of the CDM
5x20mm
Caliber : 250mA fast
