SEQUENCER WITH
DIFFERENTIAL PRESSURE
SWITCH
Technical brochure
FI 72.0483.0720E
Page 24 sur 43
- 24 -Page 24 sur 43
- 24 - - 24 -
- 24 -
- 24 -
Sequencer informations page:
1: displays the number of the last SV activated.
Remark: if there is not any declogging cycle since the device has been switched on, it indicates 0
2: displays the number of the next SV which will be activated.
3: Information about the state of the declogging cycle.
Displays the running time and its countdown.
4: counter of cycles done (user).
5: counter of cycles done (manufacturer).
6: If press on this area : return to main page.
7: Displays the current protection level.
8: reachable only at level 1.
If press on this area, the counter « number of user cycles » is reset
9: reachable only at level 2.
If press on this area, the counter « number of manufacturer cycles » is reset.
10: Value of the set point for maintenance message (nb of thousands of cycles).
If number of manufacturer cycles is reaching this set point value, a message appears in the main
page : « MAINTENANCE REQUIRED ».
If set at 0 : the function is not active. No message.
11: reachable only at level 2.
Adjustment of set point for maintenance.
1
2
3
4
5
8
9
7
6
11
10
