SEQUENCER WITH
DIFFERENTIAL PRESSURE
SWITCH
Technical brochure
FI 72.0483.0720E
Page 2 sur 43
- 2 -Page 2 sur 43
- 2 - - 2 -
- 2 -
- 2 -
SOMMAIRE :
DESCRIPTION :
The SET100DP is an adjustable device for control and full
automatization of declogging equipment, whose declogging is
done by pressured air injections.
It can perform various functions: declogging sequence, filter load
loss measurement, compressed air pressure measurement, dust
rejection monitoring associated with our CDM dust probe,
communication with the outside.
Permanent control of differential pressure and compressed air
allows an optimal efficiency according to the whole parameters, for
any type of exploitation and product.
It is equipped with:
-
18 outputs for solenoid valves (SV).
-
electric default control.
-
4 AON inputs (run order, compressed air control,
accelerated running, forced running)
-
4 relay outputs for fault or alarm reports, running report, run
order report.
Depending equipment :
-
The number of solenoid outputs can be extended. Possibility
of obtaining up to 162 SV outputs with 8 additional SV
extension boxes.
-
Differential pressure sensor for load loss dP measurement
-
Analog output 4-20mA for the report of the load loss dP
measurement information.
-
Pressure sensor for measuring compressed air A/C.
-
Analog output 4-20mA for the report of the compressed air
A/C measurement.
-
Communication with CDM dust rejection control
-
External communication via MODBUS RTU fieldbus.
Possibility of external gateway to other bus for example
PROFIBUS DP.
The device is adjustable, according to the use of it, with several
levels, protected by passwords.
All the running parameters can be seen and adjusted on the
front panel of the device, thanks to a graphic colour touch screen
Interface is multilingual.
Evolution of the declogging cycle, the running defaults and the
pressure load loss measure are clearly displayed and detailed.
The load loss dP and compressed air measurements, dust
rejection are also displayed and a graphical representation
allowing to follow their evolutions.
Note: this manual is based on a completely equipped device: the
functions and terminal blocks of options not present are not to be
taken into account.
Page
- DESCRIPTION
2
- CHARACTERISTICS
3
- DIMENSIONS AND MOUNTING
5
- PROTECTION
11
- CONNECTIONS
14
- USER INTERFACE
Main page
Load loss dP page
Compressed air A/C page
Rejection CDM
Sequencer informations page
Main menu page
Language page
Security levels page
Parameters menu page
Sequencer parameters page
Load loss dP parameters page
Output 4-20mA dP parameters page
Compressed air A/C parameter page
Output 4-20mA A/C parameter page
Fan parameters page
Rejection control CDM parameters
SV extension parameters page
Customer COM parameters page
Manual running page
System info page
19
19
21
22
23
24
25
25
26
27
28
29
30
31
33
34
35
36
37
38
39
- RUNNING
39
- FAULTS
40
- AON INPUTS
41
- RELAY OUTPUTS
41
- WARNING
42
- CALIBRATION
42
- WARRANTY
42
- CERTIFICATE
42
- GENERAL INSTRUCTIONS OF
SAFETY, ASSEMBLY,
COMMISSIONNING AND
MAINTENANCE
43
