SEQUENCER WITH
DIFFERENTIAL PRESSURE
SWITCH
Technical brochure
FI 72.0483.0720E
Page 35 sur 43
- 35 -Page 35 sur 43
- 35 - - 35 -
- 35 -
- 35 -
Rejection control CDM parameters:
1: Setting the "n1" parameter of the rejection controller CDM from 2 to 33 (reachable at level 1 and above)
n1 x PR = ALERT (see CDM instructions)
2: Setting the "n2" parameter of the rejection controller CDM from 2 to 33 (reachable at level 1 and above)
n2 x PR = ALARM (see CDM instructions)
3: Setting the "x" parameter of the rejection controller CDM from 1 to 33 (reachable at level 1 and above)
x = average duration (see CDM instructions)
4: Launching the measurement of the CDM reference point "PR" (reachable at level 1 and above)
Duration of the measurement = x (see CDM instructions)
All the time of the measurement, the button indicates "PR CALCULATION RUNNING..."
5: if press on this area: go back to parameters menu page.
6: if press on this area: go back to main page.
7: displays the current protection level.
5
1
4
2
3
6
7
