SEQUENCER WITH
DIFFERENTIAL PRESSURE
SWITCH
Technical brochure
FI 72.0483.0720E
Page 30 sur 43
- 30 -Page 30 sur 43
- 30 - - 30 -
- 30 -
- 30 -
Output 4-20mA dP parameters page:
If the device is equipped of the 4-20mA output for the report of load loss dP measure, this page allows to define the
scale of this output.
The output is at 4mA if the load loss dP measure =0 daPa.
The output is at 20mA if the load loss dP measure =indicated value.
Between 4 and 20 mA, the output is linear and proportional to the load loss dP measure.
1: Adjust the value of load loss dP measure corresponding to output 20 mA (reachable at level 1 or above) .
2: Display the current protection level.
3: If press on this area: go back to load loss dP parameters page.
4: If press on this area: go back to main page.
1
2
3
4
