SEQUENCER WITH
DIFFERENTIAL PRESSURE
SWITCH
Technical brochure
FI 72.0483.0720E
Page 3 sur 43
- 3 -Page 3 sur 43
- 3 - - 3 -
- 3 -
- 3 -
CARACTERISTIQUES :
- Supply voltage (nominal voltage) :
Depending version:
115V/230V
10 % 50-60 Hz
24V/48V
10 % 50-60 Hz
- Consumption (nominal current) maxi :
5VA + SV consumption
- Protection :
By fuses 5x20mm (see table 1)
- Tension électrovannes:
According supply voltage (see table 1)
24V/48V/115V/230V
50-60Hz
Depending version Pmax 25VA or 45VA
(ATEX version: only 25VA)
(Pmax : 45VA only available if version with SV connection by
multiconductor cable ; the choice is made at the order)
- AON inputs characteristics:
voltage : 24VDC supplied by the device
Load c/- 1mA
- Relay contact characteristics :
Dry contact. max: 125VAC/0.3A - 30VDC/1A
(to be protected by user)
- Ambient operating temperature :
not ATEX version : -20° à 60°C
ATEX version : -20°C à 55°C
- Storage temperature :
-20° to 70° C
- Box :
ABS material - IP65 (not ATEX version)
PC material - IP65 (ATEX or not ATEX version)
- Display :
Touch screen / size 4.3 inches / resolution 480x272
65536 colours / Buzzer
SEQUENCER :
- maxi outputs quantity
not ATEX version : 18
(possibility version with connection of two SV per output if SV
connection by multiconductor cable, the choice is made at order
; so 36 SV)
ATEX version : 18
Expendable to 162 (with adjunction of 8 extensions of 18)
- activation time of an output (T1)
from 3/100
th
to 255/100
th
of a second
- idle time between two outputs (T2 / T2A)
from 1 to 255 seconds
- rest time between two cycles (T3)
from 0 to 255 minutes
- forced declogging time (T4)
from 0 to 255 hours
- Number of cycles if fan stopped
from 0 to 255 cycles
- Number of cycle in manual operation
from 0 to 255 cycles
