Sequencer COMPACT
Technical brochure
FI 72.0467.0118E
Page 32 / 42
Page Parameters dust sensor CDM
We suggest to consult the user’s manual of the dust sensor to have a good knowing of this sensor:
“CDM–Sensor to monitor dust emission FI 72.0401.0115E”
1: Dust Emission Sensor CDM setting. 2 possible choices (setting enabled in level 1 & 2):
-with
-without
If CDM Sensor is enabled,
2: Adjustment of value n1 from 2 to 33 (x PR) (setting enabled in level 1 & 2).
3: Adjustment of value n2: from 2 to 33 (x PR) (setting enabled in level 1 & 2).
4: Adjustment of time X: from 1 to 33 minutes (setting enabled in level 1 & 2).
5: Self-learning of the mean dust emission rate (PR) in normal running conditions (setting enabled in level 1 & 2).
Press the button to start the self-learning.
The self-learning lasts X minutes (equals to Time X value)
During the calculation, the message « reference measure ongoing… » is displayed
6: Setting of the sample rate of the recording (setting enabled in level 1 & 2)
Adjustment from 1 to 60 sec
7: Link towards main page / synoptic
8: Link towards page parameters
1
2
3
7
8
4
5
6