Sequencer COMPACT
Technical brochure
FI 72.0467.0118E
Page 25 / 42
Page Manual Mode
Actions on this page are complementary to the automatic running of the installation.
1: Number of cycles in manual running (adjustable from 0 to 255):
Modify the number of cycles by pressing the figure,
When the choice is validated and is different of zero, the system will run n declogging cycles following the settings
in the controller part (number of SVs and duration of times of the cycle….).
The declogging cycles in manual mode are enabled, whatever will be the status of running order input and
presence compressed air or measure of load loss dP measure.
2: activation N°SV during time T1 (adjustable from 1 to 128):
Enter the identification number of SV to activate.
Then validate by pressing the button « OK », to activate the SV during time T1, which is adjusted in the controller
part.
3: link towards page general menu
4: link towards main page / synoptic
1
2
3
4
