Sequencer COMPACT
Technical brochure
FI 72.0467.0118E
Page 16 / 42
Page Informations about the load loss dP
1: measure of the differential Pressure of the filter between the clean and dusty part (=dP) (daPa)
2: Max load loss measured dP (daPa)
To reset this value, press the button “RESET” (enable at level 2)
Remark:
- The max is set at value 0. This value will be updated when the first max value is observed.
-
There is no max value during 3 seconds after the start of declogging cycle.
3: Mini load loss measured dP (daPa)
To reset this value, press the button “RESET” (enable at level 2)
Remark:
- The min is set at value 999. This value will be updated when the first min value is observed.
-
There is no min value during 2 minutes after the start of the fan.
4: link toward the load loss dP graph
5: link towards main page / synoptic
1
2
3
4
5
