Sequencer COMPACT
Technical brochure
FI 72.0467.0118E
Page 15 / 42
Page Sequencer Informations
1:
displays the number of the last SV activated.
Remark : if there is not any declogging cycle since the device has been switched on, it indicates 0
2: countdown time of the running time
3: time in the cycle (step)
4: displays the number of the next SV which will be activated.
5: user counter or manufacturer counter of cycles done by the system
To reset user counter: press Reset area (enable at level 0, 1 and 2)
To reset manufacturer counter: press Reset area (enable at level 2)
6: Press the button to display the manufacturer counter or user counter
If « manufacturer » is displayed, the counter indicates the manufacturer counter
If « user » is displayed, the counter indicates the user counter
7: Value of the set point for maintenance intervention (number of declogging cycles, from 0 to 999 x 1000).
If number of cycles on manufacturer counter exceeds the set point, a fault message will appear: « Set point for
maintenance exceeded ».
It is necessary to reset the counter to cancel the default (enable at level 2)
8: setting level
9: link towards main page / synoptic
1
2
3
4
7
6
5