Seepex Macerator 110 Series, Not Binding Operating And Assembly Instruction

Page: 87 / 111

26
9
Dismantling / Reassembly
Ausgabe
issue
B / 08.05.2013
Dokument
document
OM.CHD.02e
Blatt
sheet
4 (4)
Dismantling headstock (905)
Lubricating cutting unit (SDE)

Refer to the maintenance document (

chapter 7) for bearing lubrication.

Mount reduced fitting disc set (112) , head-
stock (905) and conical unit (909) with
screw fitting (142) on drive shaft (102) .

Check dimension "M" between cutter in
headstock
(905) and shear plate (900) .
– Use feeler gauge (WF) .

If the distance between the headstock
(905) and the shear plate (900) is not be-
tween 0.05 mm and 0.2 mm (dimension
"M"), repeat the process.

Remove screw fitting (142) .

Remove conical unit (909) , headstock
(905) and reduced fitting disc set (112) .

Soak felt ring (904) in oil bath.
– Use ISO VG 220 oil quality.

Insert felt ring (904) in pressure ring (903) .

Mount pressure ring (903) on headstock
(905) with socket screw (906) and spring
washer (907) .
– Secure socket screw medium tight
with adhesive.

Fill shaft seal (SEA) in area "L" with oil.
– Refer to maintenance document
(

chapter 7.0) for grease filling
grade.

Soak felt ring (910) in oil bath.
– Use ISO VG 220 oil quality

Mount reduced fitting disc set (112) , felt
ring (910) , headstock (905) and conical
unit (909) with screw fitting (142, 143) .