Seepex Macerator 110 Series, Not Binding Operating And Assembly Instruction

Page: 20 / 111

15
Ausgabe
issue
D / 06.03.2013
Dokument
document
OM.COM.02en
Blatt
sheet
1 (3)
6
Commissioning / De-commissioning
6.2 Measures before commissioning

Note the technical data (

chapter 3.).
6.2.1 Checking pipelines

Check flange screwed connections (SCH) .
6.2.2 Protective devices on the macerator
6.2.3 Electrical/hydraulic connections
Design: I Design: U
NOTICE
Ensure unrestrained flow of liquid.
Breakdown and/or irreparable damage to the macerator.

Open all shut-off elements prior to switching on the macerator.
DANGER
Missing protective device.
Danger from drawing in and crushing.

Equip macerator with protective device. Protective devices designed to prevent touching
surfaces or moving parts must be regarded as adequate if testing with test finger is not
possible taking into account penetration possibility, strength and shock resistance.

Observe country-specific protective regulations.

Fit touch protection on macerators with open suction casing. These safety clearances pro-
tect persons who try to reach into danger zones without additional help and under the con-
ditions specified for the different situations of reaching up, down or through parts
Touch protection is only necessary on shaft seals if parts are situated on the rotating shaft.
DANGER
Dangerous voltage.
Death or serious injury can occur.

Note safety regulations.

Disconnect motor from all sources of energy.

Secure electrical connections against restarting.