Seepex Macerator 110 Series, Not Binding Operating And Assembly Instruction

Page: 38 / 111

33
Ausgabe
issue
C / 04.05.2010
Dokument
document
OM.SEA.09e
Blatt
sheet
1 (3)
9
Dismantling / Reassembly
9.4 Single acting mechanical seal
9.4.1 Safety
9.4.2 Operating conditions and and material combination
• Adjust in accordance with the particular application
– Refer to technical data (chapter 3).
9.4.3 Design
9.4.4 Commissioning
Circulation, flushing and/or flushing pipe
• Additional flushing or circulation pipe of the shaft seal in medium not necessary.
• Flushing pipe is possible in certain circumstances and following consultation with seepex.
Adjust shaft seal

It is absolutely vital to adjust at the application site in a manner appropriate for the operating
conditions.

Refer to the sectional drawing of the shaft seal for setting measurements.

Set the setting measurements of the shaft seal to the drive shaft (102).
9.4.5 Maintenance
No maintenance is required if the machine is operated according to the regulations.
WARNING
Shaft seal is leaky.
Leakage may escape into the atmosphere.

Take safety measures to protect persons and the environment.

Wear suitable protective clothing.

Dispose of leakage appropriately.

Note applicable regulations when handling hazardous substances.
• Single acting mechanical seal
SEA
333
NOTICE
Dry running of the mechanical seal.
Damage to property may result.

The mechanical seal must be laid in liquid medium before being commissioned.