Seepex Macerator 110 Series, Not Binding Operating And Assembly Instruction

Page: 73 / 111

12
Ausgabe
issue
B / 10.09.2007
Dokument
document
OM.INS.02en
Blatt
sheet
2 (2)
5
Assembly / Installation
5.4 seepex macerator power supply
5.5 Pipelines
5.5.1 Inlet and outlet connection
• Please refer to the dimensional drawing for the position, nominal width and standard.
• Observe flow direction of liquid.
5.5.2 Pipeline dimensioning
• Observe specifications on the pressure in the inlet and outlet connection.
• Observe technical data (Chapter 3).
• Nominal width of pipeline = nominal width of macerator inlet and outlet connection.
5.5.3 Residue-free pipelines
5.5.4 Zero-potential assembly

Assembly pipelines and other components on the macerator with zero potential.
DANGER
Line voltage and rated frequency.
Death or serious injury will occur.

Observe type plate on macerator.

Note manufacturer's regulations (Chapter 13).

Observe safety regulations.
NOTICE
Damage to property from assembly residue.
Loss of warranty claim if not observed.

Keep all pipelines free of contaminants.

Remove any welding splatter, screws, steel shaving etc.