Seepex Macerator 110 Series Not Binding Operating And Assembly Instruction Download Page 70

Page: 70 / 111

Ausgabe
issue

B / 17.01.2012

Dokument
document

OM.TRA.04en

Blatt
sheet

1 (2)

Transport, Intermediate storage, Disposal

4.1

Safety

4.2

Transport

4.2.1 Dimensions, weights and center of gravity



Note the dimensional drawing (chapter 5.6).

4.2.2 Symbols

•

Meaning of symbol

4.2.3 Sling points (AP) for lifting devices

CAUTION

Damage to property/injuries due to incorrect transport

Slight injury or damage to property can occur



Comply with the safety notes and transport notes on the packaging.



Use suitable means of transport, lifting devices and tools.



Use protective equipment.

Top

Fragile

item

Against moisture

protect

Centre of gravity Lashing points

WARNING

Warning of suspended load.

Death of serious injury can occur.



Use the lashing points (AP) for lifting divices.



Note the centre of gravity (dimensional drawing, chapter 5.6).

Range I

Range U

Summary of Contents for Macerator 110 Series
















































































































Search results

Summary of Contents for Macerator 110 Series

Reviews:

Related manuals for Macerator 110 Series

Brands by name

Popular brands

Seepex Macerator 110 Series, Not Binding Operating And Assembly Instruction

Search results

Summary of Contents for Macerator 110 Series

Reviews:

Related manuals for Macerator 110 Series

Brands by name

Popular brands