Seepex Macerator 110 Series, Not Binding Operating And Assembly Instruction

Page: 22 / 111

17
Ausgabe
issue
D / 06.03.2013
Dokument
document
OM.COM.02en
Blatt
sheet
3 (3)
6
Commissioning / De-commissioning
6.3.3 Pressure in the macerator
6.4 De-commissioning
Protect macerator and auxiliary equipment from the following:
• Frost,
• deposit of solids,
• sediments of the liquid,
• corrosion on parts that come into contact with the liquid.
6.4.1 Switch off macerator
6.4.2 Empty out macerator

Empty out macerator
– Note dismounting / reassembly (

Chapter 9).
6.4.3 Dismantling the macerator

Dismantling the macerator
– Note dismounting / reassembly (

Chapter 9).
6.4.4 Storing/Protecting the macerator from corrosion
NOTICE
High pressure.
Breakdown and/or irreparable damage to the shaft seal or macerator.

Observe pressure in the macerator as specified in the technical data (

Chapter 3).
DANGER
Dangerous voltage.
Death or serious injury can occur.

Note safety regulations.

Disconnect motor from all sources of energy.

Secure electrical connections against restarting.
NOTICE
Damage to property from missing corrosion protection.
Damage to property may occur from corrosion.

Discuss suitable corrosion protection measures with seepex.
– Keep commission no. of macerator ready.