Seepex Macerator 110 Series, Not Binding Operating And Assembly Instruction

Page: 24 / 111

19
Ausgabe
issue
A / 24.01.2013
Dokument
document
OM.WTG.53e
Blatt
sheet
1 (1)
7
Maintenance
7.1 Preventive measures
7.1.1 Macerator standstill
7.2 Lubrication
7.3 Inspection
The maintenance personnel must have these operating instructions, follow them and also
require corresponding qualifications.
DANGER
Dangerous voltage.
Death or serious injury can occur.

Note safety regulations.

Disconnect motor from all sources of energy.

Secure electrical connections against restarting.
NOTICE
Macerator standstill.
Production failure due to wear.

Obtain replacement cutterhead assembly.
Item Denomination Lubricant Fill volume Remarks
1 Cutterhead
assembly
NLGI class 1,5 - 3 200 cm³ Relubrication via
lubrication nipple
2 Drive Refer to manufacturer's documentation (chapter 13._)
Knives/shear plate Conveying medium ---
Shaft seal Note dismantling/reassembly shaft seal (chapter 9.4).
Component Interval Action
Cutterhead assembly Every 600-800 operating
hours
at least every 3 months
refill the lubricants
Relubrication app. 35 cm³
Shaft seal Every week Visual check for leaks
Drive unit Every 3000 operating hours,
at least every 6 months
Comply with manufacturer's
documentation