Seepex BW 10, Operating And Maintenance Instructions Manual

Page: 102 / 186

Service and
Maintenance
Ausgabe
issue
B / 04.01.2006
Dokument
document
OM.MAI.40e
Blatt
sheet
4 (4)
•
Moisten splash ring (310) and plug-in shaft (307)
with joint grease (see index for type) and slide
splash ring (310) onto plug-in shaft (307),
observing the fitting position of the splash ring, (see
lettering on the splash ring).
•
Apply antiseize graphite petroleum to the output
pivot of the drive (ANT) and slide on the rotating
unit (RTE). Insert plug-in shaft pin (309)
horizontally.
•
Splash ring position (310)
Outer edge of splash ring (310) has to occlude
with outer edge of plug-in shaft (309).
7.4.3
Rotating Pump Parts - Re-assembly
Prepare main components:
Prepare rotor (600), coupling rod (400) and
plug-in shaft (307) as described in document
OM.PJT.04 Point 2. to 2.3
Joint (G) re-assembly as described in document
OM.PJT.04 Point 3.
7.4.4
Suction Casing (500), Casing Gasket (501) - Re-
assembly
Fit protective cover (SH) on rotor (600).
Assemble casing gasket (501) and
suction casing (500).
CAUTION
Install reducing unit (529) to suction casing (500)
with an adhesive of medium strength
7.4.5
Stator (601) - Assembly / Re-assembly
Maintenance tip:
Disassembly of the stator can be facilitated con-
siderably by first moistening the inner surface of the
stator with antiseize agent (soft or liquid soap).
Before removing the pressure flanges (700), pour the
antiseize agent into the opening between rotor and
stator on the pressure flange side. Several clockwise
(see Point 6.2.5) revolutions of the rotor will then
distribute the antiseize agent over the inner surface
of the stator and reduce the friction between rotor
and stator considerably
Lock drive (ANT) shaft against rotation.
CAUTION
Install external thread of stator (601) with an adhesive
of medium strength. Turn stator (601) to the right
using a tool (W13/see Point 9), slip it onto rotor (600)
and screw it into the suction casing (500) at the same
time.
7.4.6
Pressure Flange (700) - Assembly
CAUTION
Install pressure branch (700) with an adhesive of
medium strength