Seepex BW 10 Operating And Maintenance Instructions Manual Download Page 152

Page: 152 / 186

Operating Manual
MG1/dw-00

page 20 / 20

en MG1/dw-00 / June 13, 2006

Rev. 10.1

Disposal of the BURGMANN mechanical seal

Usually, the BURGMANN mechanical seals can be easily disposed after a thorough
cleaning.

Metal parts (steels, stainless steels, non-ferrous heavy metals) divided into the

different groups belong to scrap metal waste.

Ceramic materials (synthetic carbons, ceramics, carbides) belong to waste

products. They can be separated from their housing materials, as are
physiologically recognised as safe.

Synthetic materials/plastics (elastomers, PTFE) belong to special waste.

CAUTION!

Material containing fluorine must not be burnt.

IMPORTANT!

Some of the synthetic materials, divided into the different groups can be

recycled.

Copyright

The

Burgmann Industries GmbH & Co. KG

(Germany) holds the copyright to this

document. Customers and operators of mechanical seals are free to use this
document in the preparation of their own documentation. No claims of any type or
form can be derived in such instance.

We reserve the right to carry out technical modifications of the product

, even if

they have not yet been considered in this manual.

June 13, 2006
Department Technical Documentation

Summary of Contents for BW 10



























































































































































































Search results

Summary of Contents for BW 10

Reviews:

Related manuals for BW 10

Brands by name

Popular brands

Seepex BW 10, Operating And Maintenance Instructions Manual

Search results

Summary of Contents for BW 10

Reviews:

Related manuals for BW 10

Brands by name

Popular brands