Operating Manual
MG1/dw-00
page 7 / 20
en MG1/dw-00 / June 13, 2006
Rev. 10.1
Protect
the seal from
•
direct exposure to heat (sun, heating)
•
ultraviolet light
(halogen or fluorescent lamps, sunlight, arc welding)
•
presence or development of
ozone
(arc welding, mercury vapour lamps, high-
voltage devices, electric motors)
"
risk of embrittlement
of elastomeric materials
It has to be differentiated between:
!
M.S. stored
in the stock room
!
M.S. installed
in the machine, but not yet in operation.
#
M.S. in the stock
IMPORTANT!
Store the
seal in the original packing
lying on a
flat surface
.
•
Check the packaging periodically for damages.
•
Plastic sheet packagings with humidity indicators have to be checked every
8 weeks. The check has to be recorded.
"
Packings
exceeding 50 % rel. humidity
values have to be sent to the manu-
facturer or the
nearest BURGMANN service centre
for inspection and new
packaging.
Duly stored mechanical seal:
•
Latest 3 years after delivery of the mechanical seal
•
For reasons of safety shipment of the M.S. to BURGMANN resp. nearest
BURGMANN service centre for
"
Exchange of all secondary seals and springs
"
Verification of the flatness of the faces
"
Perhaps static pressure test.
#
M.S. installed into the machine:
ATTENTION!
A
preservation
of the BURGMANN mechanical seals is
not allowed
.
Check in case of a preservation of complete machines with mechanical seals
installed BURGMANN has to be contacted.
•
Do not
use corrosion protection agents.
"
Risk of deposition and possibly chemical attack of the secondary seals.
Due to longer erecting times of new designed plants the period between delivery of
the mechanical seal and on the other hand its installation and start up may exceed
the period of 2-3 years.
Latest after 3 years and in time
before the planned start-up of the plant the seal
has to be dismantled and to be sent to the manufacturer or the nearest BURGMANN
service centre where it can be checked and reconditioned, if necessary.
Damages caused by
improper
storage may
not
be claimed with reference to the
warranty
on the BURGMANN company
.
Summary of Contents for BW 10
