CW-6S INDIRECT COOLER INSTALLATION MANUAL | 1
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS
Read And Save These Instructions For Future Reference.
2
Warning - To Reduce The Risk Of Fire, Electric Shock, Or Injury To Persons, Observe The Following:
2
For Australian Bushfire Prone Areas
2
Employer And Employee Responsibilities
2
Installer And Maintenance Contractors - Risk Assessment
2
Some Points To Consider
2
Other Important Requirements
2
COOLER VIEWS
3
EXPLODED VIEW
4
COOLER CONTENTS
6
COOLER INSTALLATION COMPONENTS
6
INSTALLATION
On Arrival To Site
7
Cooler Method Of Installation
7
Assessment Of Roof Structure
7
Moving The Cooler
8
Access For Servicing And Maintenance
8
Cooler Location
8
Install The Heat/Cool Duct Switch
9
MagIQtouch Wall Controller
10
Combined Cooler And Heater With No Zones
10
Combined Cooler And Heater With A Common Zone And Up To 4 Zones
11
Combined Cooler And Heater With A Common Zone And Up To 10 Zones
12
Dropper Details
13
Preparing The Dropper And Transition
13
Mounting The Dropper Assembly
14
Flashing The Dropper
15
Preliminary Cable Installation
15
Weatherseal 16
Installing The Cooler
16
Lifting The Cooler
16
Crane Installation
17
ELECTRICAL REQUIREMENTS
Control Module Wiring Diagram
19
Field Wiring Diagram
19
WATER REQUIREMENTS
19
INSTALLING THE DRAIN VALVE
20
CONNECTION TO MAINS WATER
20
WATER HAMMER
20
MAINS CABLE CONNECTION
21
MAINS AND COMMUNICATION CABLE PATH
21
WALL CONTROL INSTALLATION
MagIQtouch Controller
22
Control System
22
Locating The Wall Control
22
Mounting The MagIQtouch Controller
22
CONTROL SCHEMES
Connecting The MagIQtouch / MagIQcool Controller
25
MagIQtouch Controller Operation
25
Building Management System (BMS) Interface (optional)
25
FAULT CODES INDICATED BY LED’s ON THE COOLER ELECTRONICS MODULE
26
COMMISSIONING COMPLETION CHECKLIST
27
ADJUSTING COOLER SETTINGS
28
TROUBLE SHOOTING
29
APPENDICES
Appendix – A Generic Structurally Engineered Roof Mounting Schemes:
30
Appendix – B ‘Piece By Piece’ Installation
37
NOTES 45
WARNING! Failure to install and commission the product in compliance with these instructions, or failure to do the job properly
and competently, may void the customer’s warranty. Further, it could expose the Installer and/or the Retailer to serious liability.
