24 |
WALL CONTROL INSTALLATION
Draw the cable through the wall cavity to the hole made at the
wall bracket. Connect the cable to the wall control and mount
the wall control onto its bracket.
Important!
Take care not to damage the cable or plug during
this process.
Important!
Drafts within the wall cavity can impact the
temperature reading of the wall control. We recommend that the
cable access hole be sealed, but in such a way that the cable
can still retreat into the wall cavity.
ILL1592-A
Slide and align the wall control over the protruding bracket
tabs. Pull the wall control down so the bracket tabs engage and
locate with the keyway slots on the rear.
Step 1
Step 2
ILL1593-A
ILL1594-A
To activate the MagIQtouch Controller screen, press the button
to the right.
Ensuring the MagIQtouch Controller is properly connected
power up the heater/cooler.
ILL1521-C
ILL1595-A
