Seeing Machines Guardian Gen 2, Field Support Manual

Page: 73 / 101

Test battery and ignition connection to make sure they are the correct way around (the
system still functions, but not correctly)
Ensure the ground connection is a good connection, free of grease, paint, plastic, corrosion
etc
Secure the power cable to act as a tether, on a main unit, zip tie to structural part of
the dash or under a screw
4.4.9 MFC INSTALLTION
Multi-Function Cable (MFC)
Mounting Location:
Located close to the controller
This will connect the Vibration Motor to
the system
Types of Connection:
The MFC cable splits from one connector
to four connectors
The Main connector plugs into the
Controller
The six pin connector plugs into the
vibration motor cable