Seeing Machines Guardian Gen 2, Field Support Manual

Page: 59 / 101

A good place is also where you have
considered the length of the provided
cables
Types of Mounting:
The mounting pan is a light weight
mounting template, choose 3 to 4 of the 6
mounting holes to suit your mounting
location
The orientation of the Mounting Pan
should be aligned so that you have easy
access to the T20 locking screws
Note: Mounting the Pan to the ceiling of
enclosed space is not recommended, as
heat generated from the controller will
not escape effectively
The Fasteners can be used both ways
around Picture screw fitting in both ways
Adjusting the Mounts:
Unscrew the T20 screws anticlockwise on
the Mounting Pan to allow the 2 parts to
separate, this will allow the Contoller to fit
inside.
Screw the T20 screws clockwise to lock the
Controller inside,
Note: This can be done at the end of the
install
Picture insterting controller in pan
Important Points to Note: