Seeing Machines Guardian Gen 2, Field Support Manual, Page: 48 / 101

To perform a factory reset use a pen or
something similar to push and hold the button
for 10 seconds, the green LED to the right will
flash when the unit has been reset
2.7.2 USB RECOVERY DONGLE RESTORATION
The TCP has the latest software download for the guardian system, your Recovery USB Dongle will
NOT be programmed when you receive it in your installer kit given to you in your training.
*does the recovery dongle have the latest version, or does it have the basic software eg 4.X?
As a certified technician you will receive notification of new software updates when they are
available.
This section will describe how to program, and use your USB Recovery Dongle for the Guardian
System
2.7.2.1 DOWNLOADING THE RECOVERY DONGLE SOFTWARE
Go to tcp.seeingmachines.com/recovery-dongle and select the Guardian System – Gen2 and
download the software by clicking on “Download”
The downloaded file will be a *.zip file type. Open the file and copy the content on to your desktop
2.7.2.2 PROGRAMMING THE RECOVERY DONGLE
The latest software version of the recovery dongle can be downloaded from
tcp.seeingmachines.com/recovery-dongle
2.7.2.3 USING THE RECOVERY DONGLE
Using the Recovery Dongle
Make sure the vehicle is turned off for 10
minutes prior to commencing the restoration
process