Seeing Machines Guardian Gen 2, Field Support Manual

Page: 61 / 101

Hard Mount:
Hard Mount requires the mount to be
screwed or bolted into the dashboard
using the supplied fasteners
It is required to use split washers or
nylock nuts if bolting the plate in, other
wise self tapping screw can also be used
Soft Mount:
Soft Mount uses strong automotive grade
double sided tape for adhesion
(The Hard Mount is recommended by
Seeing Machines. The Soft Mount method
should only be used if the customer
requests it)
Make sure the vehicles surface has been
cleaned; alcohol wipes can be used to aid
in grease removal which are included.
Before sticking the adhesive mount down
make sure the rotation of the mount is
positioned so that the maximum amount
of adhesion is used
If the adheisive mount is not sticking to
the vehicle you may be required to obtain
a primer
Primer may be the only tested way Jess
TBA
3M Primer 94 is recommeded for
dashboard material adhesion
Note: It is recommended to talk with your
site representative as using Primer 94 may
damage the dash on removal of the
Adheisive Mount