Seeing Machines Guardian Gen 2, Field Support Manual

Page: 66 / 101

4.4.7 VIBRATION MOTOR INSTALLATION
Vibration Motor
Mounting Location:
The Vibration Motor is to be mounted on
the driver
’ s seat. It should be located
above the adjustment rails and within the
red dotted lines
The preferred method of mounting is
clamping not drilling
Note: It is not recommended to mount
under the rails because the vibration
cannot be easily felt by the driver
The placement of the vibration motor
must not interfere with the seat belt, or
the ability to adjust the seat. And should
not be in a spot where it interferes with
the driver’s comfort and safety
Note: If mounting of the vibration motor
must be mounted outside of the red
dotted line as detailed above, you must
seek approval from the site representative
Locate a flat, round or square bar