Seat Ateca 2018 Owner'S Manual Download Page 49

Page: 49 / 412

The essentials

Air distribution



: Defrost function. The airflow is directed at the windscreen.

Manual air conditioning:

Air recirculation is automatically switched off or is not switched on. Increase the fan power to clear the wind-

screen of condensation as soon as possible. To dehumidify the air, the cooling system will automatically switch on.



: The air is directed at the chest of driver and passengers by the dash panel air vents.



: Distribution of air towards the chest and the footwell area.



: Air distribution towards the footwell.



: Air distribution towards the windscreen and the footwell.



Heated rear window: this only works when the engine is running and switches off automatically after a maximum of 10 minutes.



Air recirculation



Manual air conditioning:

Press the button to switch on or off the cooling system.





Manual air conditioning:

Maximum cooling power. The recirculation of air and the cooling system turn on automatically and air distribu-

tion adjusts automatically to the position







Manual air conditioning:

Seat heating buttons



›››

in Introduction on page 178



›››

page 178

Summary of Contents for Ateca 2018





























































































































































































































































































































































































































Search results

Summary of Contents for Ateca 2018

Reviews:

Related manuals for Ateca 2018

Brands by name

Popular brands

Seat Ateca 2018, Owner'S Manual

Search results

Summary of Contents for Ateca 2018

Reviews:

Related manuals for Ateca 2018

Brands by name

Popular brands