Seat Ateca 2018 Owner'S Manual Download Page 35

Page: 35 / 412

The essentials

Turning on/switching off the ignition, glow
plugs reheating

●

Turn on the ignition: turn the key to the

position.

●

Turn off the ignition: turn the key to the

position.

●

Diesel vehicles



: the glow plugs reheat

when the ignition is switched on.

Starting the engine

●

Manual transmission: press the clutch ped-

al all the way down and move the gearbox
lever into neutral.

●

Automatic transmission: press the brake

pedal and move the selector lever to the

position or into

●

Turn the key to the

position. The key au-

tomatically returns to the

position. Do not

press the accelerator.

Start-Stop system*

When you stop and release the clutch pedal,
the Start-Stop system* turns off the engine.
The ignition remains switched on.



›››

in Switching the ignition on and

starting the engine with the key on
page 242



›››

page 241

Lights and visibility

Related video

Fig. 43

Lights and visibil-

ity

Light switch

Fig. 44

Instrument console: light panel.

●

Turn the switch to the required position

›››

Fig. 44

Sym-

bol

Ignition switch-

ed off

Ignition is

switched on



Fog lights, dipped
beam and side

lights off.

Daylight running

lights switched on.



The “Coming
home”, “Leaving
home” and Wel-

come lights may be
switched on.

Automatic control
of dipped beam

and daytime run-

ning light.



Side light on.

Daylight running

lights switched on.



Dipped beam head-

light off

Dipped beam

switched on.



Fog lights:

move the switch to the first po-

sition, from positions









Rear fog light:

move the switch complete-

ly from positions







●

Turn on fog lights: push the switch or turn it

to the



position.



›››

in Side light and dipped beam

headlight on page 150



›››

page 149

Summary of Contents for Ateca 2018





























































































































































































































































































































































































































Search results

Summary of Contents for Ateca 2018

Reviews:

Related manuals for Ateca 2018

Brands by name

Popular brands

Seat Ateca 2018, Owner'S Manual

Search results

Summary of Contents for Ateca 2018

Reviews:

Related manuals for Ateca 2018

Brands by name

Popular brands