Seat Ateca 2018 Owner'S Manual Download Page 191

Page: 191 / 412

Introduction

●

Always keep the armrest closed while the

vehicle is in motion.

WARNING

Opening a CD or DVD player's housing can
lead to injuries from invisible laser radia-
tion.

●

Have CD or DVD players repaired only by

a qualified workshop.

CAUTION

The Infotainment system can be damaged
by the incorrect insertion of a data storage
device or the insertion of an incompatible
data storage device.

●

When inserting a data storage device,

make sure it is correctly positioned.

●

Applying force may irreparably damage

the memory card slot locking mechanism.

●

Only use compatible memory cards.

●

When inserting and removing CDs and

DVDs, always hold them at right angles to
the front of the CD/DVD drive without tilt-
ing so as not to scratch them.

●

If a CD or DVD is inserted while another is

already in the unit or being ejected, the
DVD drive may be irreparably damaged.
Always wait until the data medium is com-
pletely ejected.

CAUTION

Any foreign objects stuck to a data storage
device and non-round media may damage
the CD or DVD player.

●

Only clean, standard 12 cm CDs or DVDs

should be used.

–

Do not affix stickers or other items to
the data medium. Stickers may peel off
and damage the drive.

–

Do not use printable data media. Prin-
ted labels and coverings may peel off
and damage the CD/DVD drive.

–

Do not insert 8 cm single CDs or irregu-
larly shaped CDs or DVDs.

–

Do not insert DVD-Plus discs, Dual
Discs or Flip Discs, as these are thicker
than normal CDs.

CAUTION

The vehicle loudspeakers may be dam-
aged if the volume is too high or the sound
is distorted.

Note

For the proper functioning of the Infotain-
ment system it is important that the date
and time set in the vehicle are correct.

189

Summary of Contents for Ateca 2018





























































































































































































































































































































































































































Search results

Summary of Contents for Ateca 2018

Reviews:

Related manuals for Ateca 2018

Brands by name

Popular brands

Seat Ateca 2018, Owner'S Manual

Search results

Summary of Contents for Ateca 2018

Reviews:

Related manuals for Ateca 2018

Brands by name

Popular brands