Seat Ateca 2018 Owner'S Manual Download Page 196

Page: 196 / 412

Infotainment System

Display and function buttons: operation

and effect

The scroll bar is shown on the right and its
size depends on the entries in the list.

Move the bar on the screen by pressing
lightly and without lifting the finger, see

›››

page 194, Opening list entries and

searching in lists

Movable cursor

: Move the cursor around

the screen by pressing lightly and without
lifting the finger.

OR:

To move the cursor to a particular po-

sition, press that spot on the screen.

Fixed crosshair

: Press the up, down, left

and right arrows to move the sound ac-
cording to preference. The cursor

will

move.

OR:

Press the central button to centre the

stereo sound in the centre of the passen-
ger compartment



Press it on some lists to move up a level,
one by one.

BACK



Press to return from the submenus one at

a time to the main menu or to undo the

entries made.



When pressed, a pop-up window opens
(options window) which displays other
setup options.

Display and function buttons: operation

and effect





Some functions or messages are accom-

panied by a check box and are activated



or deactivated



by pressing said

check box.

Press to confirm an entry or a selection.

Press to close a pop-up window or an in-

put window.





Press them to change the setup adjust-

ments one at a time.



Move the slider around the screen by

pressing it lightly and without lifting your

finger.

Opening list entries and searching
in lists

Fig. 193

Entries on a setup menu list.

The entries on a list can be activated by
pressing them on the screen directly or by us-
ing the adjustment button.

Mark list entries using the setup button
and open them

●

Turn

the setup button to mark the entries on

the list with a rectangle one by one and con-
tinue searching the list in this manner.

●

Press

the setup button to activate the

marked entry on the list.

Search lists (scrolling the screen)

The scroll bar is shown on the right and its
size depends on the entries in the list

›››

Fig. 193

●

Briefly press

the screen above or below the

scroll marker.

●

OR:

Place a finger over the scroll marker

and

without lifting it

, move it around the

screen. Lift your finger off the screen when
you reach the desired position.

●

OR:

Place your finger in the centre of the

screen and

without lifting it

, move it around

the screen. Lift your finger off the screen
when you reach the desired position.

194

Summary of Contents for Ateca 2018





























































































































































































































































































































































































































Search results

Summary of Contents for Ateca 2018

Reviews:

Related manuals for Ateca 2018

Brands by name

Popular brands

Seat Ateca 2018, Owner'S Manual

Search results

Summary of Contents for Ateca 2018

Reviews:

Related manuals for Ateca 2018

Brands by name

Popular brands